Inspection Setup & ROI Types
本页介绍在 OV20i 系统中定义检验区域和组织基于 AI 的检验工作流的基本概念。
ROI (Region of Interest) 基本概念
什么是 ROIs?
ROIs(Regions of Interest)定义 AI 模型将执行检验分析的矩形区域。这些区域将处理能力聚焦于特定位置,从而提高精度与效率。
核心 ROI 概念:
- AI Model Workspace - ROIs 作为 AI 模型分析图像数据的参考位置
- Processing Efficiency - 集中分析提升检验速度
- Result Precision - 有针对性的分析降低假阳性率
- Multiple Regions - 可以定义多个 ROIs 以实现全面检验
OV20i 的 ROI 类型
仅限 Rectangular ROI
OV20i 将 rectangular ROIs 作为所有检验场景的单一 ROI 类型。
为何使用 Rectangular:
- Universal Application - 适用于大多数工业检验需求
- AI Optimized - Rectangular ROIs 优化模型处理
- Simple Implementation - 直接的设置与管理
- Alignment Compatible - 与模板对齐系统无缝兼容
ROI 命名与标识
Default Naming: "New ROI"
每个新 ROI 的默认名称为 "New ROI",应修改为具有实际含义的标识。
为何更改 ROI 名称:
- System Integration - 命名的 ROI 在自动化中更易引用
- Maintenance - 清晰的名称简化排错
- Documentation - 有意义的名称提升系统理解
命名示例:
- "Bolt_Tightness_Check"
- "Label_Presence_Verify"
- "Surface_Quality_ROI"
- "Component_Alignment"
Inspection Types: 分组与组织
Default: "Inspection Type 1"
系统将创建默认分组名 "Inspection Type 1",应更改以反映实际的检验目的。
Inspection Type 功能:
- ROI Grouping - 将相关 ROIs 按逻辑类别组织起来
- Result Organization - 按类型对检验结果进行分组
- Workflow Management - 简化复杂多区域检验
关键:Node-RED 集成
为何 Inspection Type 名称重要:
更改 Inspection Type 名称很重要,因为 Node-RED 使用此名称进行输出发布。
Node-RED 输出影响:
- Data Publishing - 结果使用 Inspection Type 名称进行发布
- External Integration - 其他系统接收带有这些标识符的数据
- Automation Logic - Node-RED 流引用这些名称进行路由
有效命名策略:
- Process-Based: "Quality_Control", "Dimensional_Check"
- Feature-Based: "Surface_Inspection", "Component_Verification"
- Location-Based: "Top_Panel_Check", "Side_Assembly"
- Avoid Generic: 将 "Inspection Type 1" 替换为具体标识符
Setup Workflow
配置过程
关键步骤:
- Inspection Type Naming - 将 "Inspection Type 1" 更改为有意义的名称
- ROI Creation - 使用 + Add Inspection Region 添加矩形区域
- ROI Naming - 将 "New ROI" 更改为描述性名称
- Positioning - 适当调整 ROI 的尺寸和位置
- Validation - 验证设置是否满足检验要求
多 ROI 管理
组织策略:
- Logical Grouping - 将相关 ROIs 放在适当的 Inspection Types 下
- Consistent Naming - 使用系统命名约定
- System Integration - 考虑 Node-RED 的输出要求
Integration Considerations
Template Alignment Integration
Alignment Benefits:
- Automatic Adjustment - ROIs 随部件对齐修正而移动
- Consistent Coverage - ROIs 保持相对于部件特征的相对位置
- Position Tolerance - 部件差异不影响检验精度
Node-RED Compatibility
Integration Requirements:
- Unique Names - 确保输出的 Inspection Type 名称唯一
- Naming Standards - 为系统集成建立约定
- Output Testing - 验证 Node-RED 是否接收正确的标识符
Best Practices
高效 ROI 配置
关键准则:
- Descriptive Naming - ROI 与 Inspection Type 名称都应具备含义
- Appropriate Sizing - 在特征覆盖和处理效率之间取得平衡
- Strategic Organization - 将相关 ROIs 按逻辑分组
系统集成
规划注意事项:
- Node-RED 要求 - 为数据路由规划 Inspection Type 名称
- Documentation - 记录 ROI 的用途和集成点
- Testing - 验证输出能正确到达目标系统